|
Download or Starting iCONCommunicator™
This page will automatically launch the Communicator. Please fill in your alias or screen name when prompted. NOTE: Some Conference Centers will have limited access, set by it's owners; you will be asked for an Access Code to enter.
FIRST TIME USERS
If you are using iCONCommunicator for the first time this page will start downloading the software automatically. Please wait while the software is being downloaded. This will take a few seconds depending on your connection. The communicator is then started and ready for use. |
Clear Cookie
You might want to uninstall your iCON cookie, which will allow
you to reinstall a new client. Just click here
to uninstall the cookie.
Trouble downloading the software
Refreshing this page will result in downloading the software after uninstalling it.
iCONCommunicator not working properly
If you are having trouble with your Communicator, it is possible that your settings have become corrupted. Please click here to refresh your computer's settings. This will allow the software to re-install the next time you enter an iCON Center
System Requirements
The PC that you operate to run the iCONCommunicator™ software has to meet the following minimum configuration standards.
| |
Minimum |
Recommended |
| Microprocessor |
Pentium III® or compatible |
Pentium III® or compatible |
| Memory |
64 MB of RAM |
128 MB of RAM |
| Operating System |
Microsoft Windows 98® or higher version |
Microsoft Windows XP® or higher version |
| Screen Resolution |
800 x 600 |
1024 x 768 |
| Web Browser |
Internet Explorer 5.0
or higher version |
Internet Explorer 6.0
or higher version |
| Internet Connection |
56.6 Kbps Dial-Up
Internet Connection |
Broadband Cable or DSL
Internet Connection |
| Minimum Free Hard Drive Space |
2 MB |
2 MB |
Connections
- If
you use firewall software it can be required to respond
to its prompt to grant permission when the Communicator
needs to connect to the iCONCommunicator™ servers.
- You
might be running an Internet Accelerator application.
These applications configure your browser and network settings
with proxy configurations that are very complex in a way
the iCONCommunicator is sometimes unable to understand.
Try disabling the software and try again to connect to the
iCONCommunicator™ servers.
- For
some very complex auto-proxy configurations, the iCONCommunicator
will be unable to determine the IP address of the proxy
to use. Specifying your proxy server directly in the proxy
settings of your browser will solve the problem to connect
to the iCONCommunicator™ servers.
- You
might not have an active connection to the Internet.
Error
messages
'Alias
in Use'
Someone else is in the iCON Center with
the name you want to use, you will have to change your entry
name.
'You must enable cookies'
Receiving cookies must be enabled
to use the iCONCommunicator™. To enable your cookies
you have two options:
Click
on Edit, and add as allowed sites: howudodat.com and download.howudodat.com.
These are the names of our download servers. Click on apply,
then ok.
Start
MSIE, go to Tools > Internet Options > Click on the Privacy tab and lower your settings
(not recommended)
'msg=&close=1'
Simply change (or add) a character in your iCON Center name
and enter again.
'Unable
to Launch' or 'invalid page fault'
In the browser menu, go to Tools > Internet Options, then click on Delete Files
in the dialog box. After deleting try opening the iCONCommunicator™ again .
|
